You must be helpless when you encounter toilet leakage in life. As long as we find the cause of toilet leakage and make toilet leaky maintenance, we can solve this problem. So what do we do when we meet the leakage of toilet? What are the ways of toilet leakage? What's the following? Let's learn the causes of toilet leakage and how to deal with it.
The cause of the leaking of the toilet
Material: inferior part manufacturers a lower production cost, use inferior materials caused by the inlet valve outlet and inlet pipe itself when injection cracking, resulting in seal failure, water drain valve in the water tank overflow pipe into the toilet, causing "long water".
Excessive pursuit of miniaturization of water tank parts makes floating buoyancy (or floating bucket) buoyancy insufficient, and when water is not flooded with floating balls or floating barrels, the inlet valve can not be closed, so that water can flow into the water tank continuously, and finally, it will leak from the overflow pipe to the toilet. Especially when the water pressure is high, this phenomenon is particularly obvious.
Improper design: the water tank accessories in the action of the interference, leading to water leakage. For example, the floating ball and the floating ball of the floating ball when the water tank is released will affect the normal reduction of the plate, causing the leakage of water. The floating ball is too long and the floating ball is too large. It causes friction between the tank wall and the free rise and fall of the floating ball, causing the sealing failure and leakage of water.
The sewerage valves are tightly sealed in each connection. The non one-time forming of the drainage valve because of the tight seal, under the action of water pressure, water from the interface clearance through the overflow pipe into the toilet, causing leakage. If the sealing ring is not closely matched with the tube wall, the water leakage will often occur.
Treatment of water leak in toilet
Check whether the flush switch is reset. Some of the plastic flush switches in the toilet have been worn out for a long time. The general repeating switch can be reset several times. Check the rubber washer under the valve under the ball valve for aging, tight seal, and find that the problem needs to be replaced.
Check whether the connection between the water tank spherical floater and the inlet switch is loose, whether the floater is in place and whether the switch is not closed, causing the water intake to stop. After the water is full, it flows out from the vertical drain pipe, so long as the floater and the water valve switch connection point can be tightened. If the rubber ball valve is damaged, the seal is not tight and the water is leaking, it needs to be replaced immediately.
The leakage of water tank is basically the problem of drain valve. If we look at the rubber plug of the outlet of the water tank, if the rubber plug of the outlet is damaged or there is foreign matter blockage, it will cause the plugging of the rubber plug is not strict, and it will also cause the toilet water to flow. If the water pipe in the water tank is not placed correctly, more or less will also affect.
